Multivariate optimization and comparison between conventional extraction (CE) and ultrasonic-assisted extraction (UAE) of carotenoid extraction from cashew apple

Carotenoids are an essential component of cashew and can be used in pharmaceuticals, cosmetics, natural pigment, food additives, among other applications. The present work focuses on optimizing and comparing conventional and ultrasound-assisted extraction methods. Every optimization step took place with a 1:1 (w:w) mixture of yellow and red cashew apples lyophilized and ground in a cryogenic mill. A Simplex-centroid design was applied for both methods, and the solvents acetone, methanol, ethanol, and petroleum ether were evaluated. After choosing the extractor solvent, a central composite design was applied to optimize the sample mass (59–201 mg) and extraction time (6–34 min). The optimum conditions for the extractor solvent were 38% acetone, 30% ethanol, and 32% petroleum ether for CE and a mixture of 44% acetone and 56% methanol for UAE. The best experimental conditions for UAE were a sonication time of 19 min and a sample mass of 153 mg, while the CE was 23 min and 136 mg. Comparing red and yellow cashews, red cashews showed a higher carotenoid content in both methodologies. The UAE methodology was ca. 21% faster, presented a more straightforward composition of extracting solution, showed an average yield of superior carotenoid content in all samples compared to CE. Therefore, UAE has demonstrated a simple, efficient, fast, low-cost adjustment methodology and a reliable alternative for other applications involving these bioactive compounds in the studied or similar matrix.     

Analysis of a new multispecies tumor growth model coupling 3D phase-fields with a 1D vascular network

In this work, we present and analyze a mathematical model for tumor growth incorporating ECM erosion, interstitial flow, and the effect of vascular flow and nutrient transport. The model is of phase-field or diffused-interface type in which multiple phases of cell species and other constituents are separated by smooth evolving interfaces. The model involves a mesoscale version of Darcy’s law to capture the flow mechanism in the tissue matrix. Modeling flow and transport processes in the vasculature supplying the healthy and cancerous tissue, one-dimensional (1D) equations are considered. Since the models governing the transport and flow processes are defined together with cell species models on a three-dimensional (3D) domain, we obtain a 3D–1D coupled model.     

Imposing accurate wall boundary conditions in corrective‐matrix‐based moving particle semi‐implicit method for free surface flow

Corrective matrix that is derived to restore consistency of discretization schemes can significantly enhance accuracy for the inside particles in the Moving Particle Semi‐implicit method. In this situation, the error due to free surface and wall boundaries becomes dominant. Based on the recent study on Neumann boundary condition (Matsunaga et al, CMAME, 2020), the corrective matrix schemes in MPS are generalized to straightforwardly and accurately impose Neumann boundary condition. However, the new schemes can still easily trigger instability at free surface because of the biased error caused by the incomplete/biased neighbor support. Therefore, the existing stable schemes based on virtual particles and conservative gradient models are applied to free surface and nearby particles to produce a stable transitional layer at free surface. The new corrective matrix schemes are only applied to the particles under the stable transitional layer for improving the wall boundary conditions. Three numerical examples of free surface flows demonstrate that the proposed method can help to reduce the pressure/velocity fluctuations and hence enhance accuracy further.     

石墨基液流电池复合双极板

液流电池是一种安全性高、使用寿命长、可扩展的大规模储能系统,可以协助电网调峰储能,提高能源利用率,发展前景广阔。双极板是液流电池的重要组成部分。功能上起到了分隔、串联电池、传导电流、为电堆提供结构支撑等作用。从成本构成角度看,双极板的价格占电堆成本的比重也较大。开发高性能、低成本的双极板对加快液流电池的商业化应用具有重要意义,也是目前业界的迫切需求。虽然文献上报道了许多针对液流电池双极板开发的工作,但是目前高性能、低成本的液流电池双极板产品仍无法充分满足市场需求。本文着重介绍了石墨基复合双极板的研究现状,介绍了材料选择、工艺流程对关键性能的影响,对相关工作进行了评述,并为液流电池双极板的开发提出了建议。     

Interface‐fitted moving mesh method for axisymmetric two‐phase flow in microchannels

A boundary‐fitted moving mesh scheme is presented for the simulation of two‐phase flow in two‐dimensional and axisymmetric geometries. The incompressible Navier‐Stokes equations are solved using the finite element method, and the mini element is used to satisfy the inf‐sup condition. The interface between the phases is represented explicitly by an interface adapted mesh, thus allowing a sharp transition of the fluid properties. Surface tension is modelled as a volume force and is discretized in a consistent manner, thus allowing to obtain exact equilibrium (up to rounding errors) with the pressure gradient. This is demonstrated for a spherical droplet moving in a constant flow field. The curvature of the interface, required for the surface tension term, is efficiently computed with simple but very accurate geometric formulas. An adaptive moving mesh technique, where smoothing mesh velocities and remeshing are used to preserve the mesh quality, is developed and presented. Mesh refinement strategies, allowing tailoring of the refinement of the computational mesh, are also discussed. Accuracy and robustness of the present method are demonstrated on several validation test cases. The method is developed with the prospect of being applied to microfluidic flows and the simulation of microchannel evaporators used for electronics cooling. Therefore, the simulation results for the flow of a bubble in a microchannel are presented and compared to experimental data.     

Cytotoxic dimeric half-sandwich Ru(II), Os(II) and Ir(III) complexes containing the 4,4′-biphenyl-based bridging ligands

A series of dinuclear half-sandwich Ru(II), Os(II) and Ir(III) complexes [Ru₂(μ-Lⁿ)(η⁶-pcym)₂Cl₂](PF₆)₂ ( 1 , 4 ), [Os₂(μ-Lⁿ)(η⁶-pcym)₂Cl₂](PF₆)₂ ( 2 , 5 ) and [Ir₂(μ-Lⁿ)(η⁵-Cp*)₂Cl₂](PF₆)₂ ( 3 , 6 ), based on 4,4′-biphenyl-based bridging Schiff base ligands N,N′-(biphenyl-4,4′-diyldimethylidyne)bis-2-(pyridin-2-yl)methanamine (L¹; for 1 – 3 ) and N,N′-(biphenyl-4,4′-diyldimethylidyne)bis-2-(pyridin-2-yl)ethanamine (L²; for 4 – 6 ) is reported; pcym = 1-methyl-4-(propan-2-yl)benzene, Cp* = pentamethylcyclopentadienyl. The complexes were characterized by relevant analytical techniques (i.e. elemental analysis, FT-IR, NMR, ESI-MS), and their in vitro cytotoxicity was assessed at six cancerous and two non-cancerous (healthy) human cell lines. Overall, complexes 4 – 6 , containing the L² bridging ligand, revealed higher cytotoxicity as compared with 1 – 3 and, thus, they were studied in greater detail. The best-performing complex 6 exceeded at least twice the in vitro cytotoxicity of cisplatin and showed high selectivity towards the cancer cells over the normal ones, including the primary culture of human hepatocytes. In contrast to cisplatin, complexes 4 – 6 did not induce the cell cycle modification of the treated A2780 human ovarian carcinoma cells (studied by flow cytometry and Western blot analysis). High levels of superoxide anion were induced by complexes 4 – 6 at the A2780 cells. The levels of activated forms of Caspase-3 and Caspase-8 at the A2780 cells treated by Ru(II) complex 4 were comparable with cisplatin, while complexes 5 and 6 had only a minor effect on activation of these caspases.     

Rhodium‐Catalyzed Stitching Polymerization of 1,5‐Hexadiynes and Related Oligoalkynes

A new mode of polymerization, rhodium‐catalyzed stitching polymerization, has been developed for the synthesis of π‐conjugated polymers with bridged repeating units from nonconjugated 1,5‐hexadiynes containing both terminal and internal alkyne moieties as monomers. The polymerization proceeded smoothly with a high degree of stitching efficiency under mild conditions, and 1,5,9‐decatriyne and 1,5,9,13‐tetradecatetrayne monomers could also be employed. The present polymerization strategy would be particularly beneficial for the synthesis of polymers consisting of a repeating unit that is difficult to prepare as a stable monomer because it does not require the use of a preformed bridged π‐conjugated monomer.